Meduza Posted June 8, 2006 Share Posted June 8, 2006 Yes... Just discovered that my Studiomaster Powerhouse 708 powermixergot a broken fader pot for channel 4... It has propably got destroyed when I transported the stuff home the last time... Is there anyone here that either got the service manual with a spare parts list ormaybe know what slider pot I can replace it with ? I have knowledge to replace it with no problems as soonas I get hold of the part. The pot that is there right now is propably a 10kohm slider pot It got a sliding track of about 70mm and the center of the screws is at 82mm distance from each other. anyone ? Link to comment Share on other sites More sharing options...
Rob_Beech Posted June 9, 2006 Share Posted June 9, 2006 As a rule, alot of faders would fit. However I'm not sure if that particular model had a different style fader.Is the 708 the one with 0db in the centre of its travel or was that the model before it? Contact Graham (sent e-mail address via PM) who currentlyworks for Studiomaster. or.. currently IS studiomaster (probably a better description). Rob Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.