scoobster Posted May 6, 2006 Share Posted May 6, 2006 Am sending 4 seperate aux sends to monitors in orchestra pit but am having problems as when I test monitors 3 I get the same output from monitor 4 even though aux 4 is turned down !!!!!! Have tried re patching but still same prob for some strange reason. When you connect monitor directly to desk via short cable its fine its just when its on the end of a stage box !!! Scoobster Link to comment Share on other sites More sharing options...
Bobbsy Posted May 6, 2006 Share Posted May 6, 2006 Er, well to state the obvious, have you checked the wiring to and in the stage box? Bob Link to comment Share on other sites More sharing options...
johnhuson Posted May 6, 2006 Share Posted May 6, 2006 Just wanted to check that these are self-powered monitors, I assume they are from your description. Like Bobbsy sounds like the stage box, or the desk end connections are at fault. Link to comment Share on other sites More sharing options...
scoobster Posted May 6, 2006 Author Share Posted May 6, 2006 Just wanted to check that these are self-powered monitors, I assume they are from your description. Like Bobbsy sounds like the stage box, or the desk end connections are at fault. Yeah they are self powered but regards the stage box have re patched into different XLR ( ie 1 into 5 , 3 into 8 ... ) but still get same prob in same two monitors even though they have been repatched ! Link to comment Share on other sites More sharing options...
Lamplighter Posted May 7, 2006 Share Posted May 7, 2006 It would be worth checking that mons 3+4 are not linked via the input loopthrough. Brian Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.