Hambone Posted May 3, 2006 Share Posted May 3, 2006 I'm using my (older, not /96) Yamaha 01V with Ableton Live for live quad sound. I'm sending the main output FOH, and the rear channels through the omni outs as a stereo aux send. What I'd really like to do is to control the overall volume to all four corners of the room with the main stereo master fader. Right now, I've got to use the main stereo fader to adjust FOH, and toggle to the aux send fader to adjust the volume to the back of the room, then try to balance the two. Is there any way to configure the stereo master so it controls the aux send levels at the same time as the stereo master? Cheers! Link to comment Share on other sites More sharing options...
london sound Posted May 3, 2006 Share Posted May 3, 2006 Not to my knowledge, only on96 version. Ian Link to comment Share on other sites More sharing options...
Hambone Posted May 3, 2006 Author Share Posted May 3, 2006 I thought I could do it by routing the aux sends to the monitor out, but it's not affected by the stereo master fader, either. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.