symondsjames Posted April 20, 2006 Share Posted April 20, 2006 Hello there, I'm using an azure to control 4 robe575's, I know it quite well put can't seem to be able to edit a fixture chase speed once it's running. The "learn speed" button doesn't want to play balll. Any idea's? regards, James Link to comment Share on other sites More sharing options...
boac Posted April 20, 2006 Share Posted April 20, 2006 make sure you are connected to the chase. you can connect to the chase by pressing the connect button (down on the right somewhere IIRC, at least it is on the shadow) and then pressing the swop button for the chase you want to control. you should now have the speed and crossfade of the chase on the wheels and learn tempo ought to work. been a while since I used an azure much but certainly with the Pearl, the desk often doesn't connect to the chase automatically when you push the fader up if you have fixtures selected Link to comment Share on other sites More sharing options...
niclights Posted April 20, 2006 Share Posted April 20, 2006 Yes, speaking from a Pearl perspective (which should be the same), fixture selection will change wheels to attribute control. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.