EyeC Posted April 6, 2006 Share Posted April 6, 2006 I have a slight problem that needs quick help.... I have Behringers Eurorack MX 2004A and Crest Audio's VS 650 amplifier. I would need to connect a Yamaha EQ-330 equalizer efficiently to those... what should I do? RSVP ASAP Link to comment Share on other sites More sharing options...
soundo26 Posted April 6, 2006 Share Posted April 6, 2006 What's the problem? outputs of the eurorack go to the inputs of the EQ.......then outputs of the EQ go to the amp!! Link to comment Share on other sites More sharing options...
EyeC Posted April 6, 2006 Author Share Posted April 6, 2006 well... it didn't equalize the sound... or at least I couldn't hear any difference in it Link to comment Share on other sites More sharing options...
jpitkin Posted April 6, 2006 Share Posted April 6, 2006 Make sure you have the eq "in" and turned on. Quick way to check that all is good is by turning the gain on the EQ down to see that it's functioning. I assume you mean it didnt change the sound when you changed the fader levels for each frequency? TBH If you dont know how to use an EQ then don't use it until you're happy with what everything does, whilst when used properly the sound can be improved, if you use it and are unsure about what to do with it its most likely you will end up with a worse sound than you started with (you can check this by bypassing the EQ). Have you read the manual? Hope this helps Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.