Ben Lawrance Posted March 3, 2006 Share Posted March 3, 2006 Hi All I need to split a few mic lines to run 2 differant desk. One for FOH & Mons, one for recording off. Is there a correct way to split the signal?? Or is it just a case of using Y splits? What happens to the impedance/level of the signal? What if I want to use phantom?? So many questions.....arghhhh!!! Cheers Link to comment Share on other sites More sharing options...
david.elsbury Posted March 3, 2006 Share Posted March 3, 2006 As discussed before And here as well Summaried, Y splits often work, make sure all desks are on the same mains earth, level is pretty much no different to using one console, most desks dont mind phanton being injected into them but if it's a problem then lift all the pin 1's on the monitor desk end and as well as preventing any ground loops phantom will not get through. :)David Link to comment Share on other sites More sharing options...
Brian Posted March 3, 2006 Share Posted March 3, 2006 The links David posted pretty much cover this so... Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.