lightsource

Simply..... No. Audinate / Dante are suffering greatly from the global chip supply shortage, with most of their products on some eye-watering lead times. A&H stock is available, but in short supply, so a bit hit and miss, but anything with Dante cards / chips inside, I wouldn't hold my breath. Also prices are sky-rocketing on some products.

Probably be better at the moment to hire from a local company if you can.
 

To ALL company owners / directors etc.

There is a facebook page called Production Company Owners - Discussion Forum.

https://www.facebook...=group_activity

I urge anyone who is in financial difficulty, or struggling to get grants / loans they are entitled to, to join this group. PSA are also there.

There's a lot of us in the same boat, and it's sinking fast for some.

A&H part numbers to cross-reference.

http://support.allen-heath.com/Knowledgebase/Article/View/1107

Sounds like you unit is thermalling out.... Check the fan is working and that it is blowing air the correct direction.

 

If the fan seems fine then replace the thermal trip located in the head next to the starter.

 

The thermaling out of the lamp is whats causing the light sensor to trip telling the unit to stop P&T

Interesting, I have a MAC300 with a similar fault, the unit works fine for a period of time, (sometimes days, sometimes only 20 mins) then suddenly lamps off, and becomes unresponsive to DMX. No error messages appear on the display. Lamps itself back on, and responds to DMX of it's own accord most of the time after about 10 mins, but sometimes needs a reset.

Never got to the bottom of this one!