Jump to content

empyfree

Regular Members
  • Posts

    349
  • Joined

  • Last visited

Everything posted by empyfree

  1. We’re big fans of the RCF HD10. Smart enough for presentation work. Loud enough for smaller party work.
  2. How about mis-using some ball casters? CNBTR 22mm Ball Dia Carbon Steel Transfer Bearing Unit Ball Conveyor Roller Stem Caster M10 Thread Weight 90KG Loading Weight https://www.amazon.co.uk/dp/B07MG3ZR4V/ref=cm_sw_r_cp_api_glt_fabc_32PRRBC412PG2B6NF94S
  3. What do you want to be able to do with it? Are you happy with sticking to standard resolutions or will you want to do custom sized canvases, blends etc? If it’s just switching standard sources I don’t think you can go far wrong with an Atem TVs 4K. It’s all SDI but you’d have plenty left to build a nice accessory rack with a monitor and some convertors. The TVS 4K has the nice trick of input scalers, so you can mix and match on that side of things. Contrary to Mac’s experiences above we have had generally good times with the analog way stuff we own, we run an Ascender which has done us proud over the last four years. Lots of very different events under its belt.
  4. That link 404’s for me. I found this though. https://docs.unrealengine.com/en-US/WorkingWithMedia/DMX/index.html
  5. There are strict rules about any working at height... Fascinating place. Wonder if fibre would have been your friend here. Longest cable run was 5m! Fibre would have been overkill! With hindsight I would have done an ultra short hdmi link into a decimator and then SDI links to the projectors.
  6. We just did RAF fylingdales... ended up with 52k of projection (four 10k and one 12k) all lined up to get a decent brightness. Power wasn’t our problem (45kVa road row genny), interference was! Something to do with being 180m from one of the worlds most powerful radar arrays didn’t play nicely with HDMI links. Ended up dropping to HD and running everything SDI.
  7. ZoomOSC is a powerful way of gaining some control over zoom meetings. If you’re familiar with OSC control it’s not too steep a learning curve!
  8. Where are you based? And is your budget for the whole thing or just for the bulbs part?
  9. Lit Ripon Cathedral tonight. Seems to have been a good turnout around the country.
  10. Best wishes Paul. Lot of pressure at the moment.
  11. I’ve seen their rendering of a product for a few years. Haven’t seen one in the flesh other than the fleeting glimpse in a YouTube review. Keeps showing up because I work for another company called AV Matrix! We usually have a laugh about how nice it would be to buy branded products, then remember that we like blackmagic and decimator kit.
  12. Hide a basic desk somewhere with fader 1 at full. Use a standard wall switch to power this on and off along with the lights?
  13. Worth holding out until Black Friday. Resolume usually have a good sale.
  14. You could probably hook up an interspace micro cue to trigger Companion (from Bitfocus), which in turn would fire OSC at your hopefully compatible Lx desk! Or artnet...
  15. You can setup and test companion without a stream deck. It has a full emulator mode, and a web interface too. Stunningly powerful bit of kit. We use it with a small app on remote Pcs to control Powerpoint. Also to trigger playback pro plus, and control the switcher! You can create multiple action buttons, so a single press can switch our Ascender to the correct input, then fire the VT on a MacBook.
  16. Have you? Or were you yellow carded for that... and then red carded for your response to the yellow....
  17. If you’re considering buying a new box you might look at the Novastar VX4s. It will directly control your wall and also do all the scaling you want at the same time.
  18. What resolution do you want to send? Is delay an issue? Some of the hdbaset kits are phenomenal now, but your cabling must be top notch! These can give you 4K capacity and very low latency Av over Ip solutions tend to be a bit more forgiving about cable quality and can run through existing networks and switches etc. You can get various quality boxes, but latency is going to be a real factor. Perfect for distribution around a venue where you can only see one screen at once. 30 to 50m is relatively short distances. I’d also consider the SDI route if you can. It’s very robust and easy to extend.
  19. CPL-Av are a good bunch. They can do the Panasonic kit, and make their own “rigtec” brand of fly frames which are exceeding good.
  20. How many pixels per panel (horizontal / vertical)? For an all in one solution you may want something like a novastar vx4s. Alternatively you could buy a separate scaler (Calibre, RGBlink, barco etc) to adjust your signal before it gets to the processor.
  21. Would feeding the power in from both ends mitigate this? What can be done to protect things?
  22. Cheers Pmiller056. I figured there must be a way around extending the control signal, having the controllers centrally located must be preferable in a lot of installations? I'll look into the RS485 converters you mention, I'll also investigate this solution that I spotted while trawling youtube! As Tim pointed out above I need to split the power into smaller chunks to keep the power drop to a minimum. I have no issue running chunky flex up to the tape. Split in half I'll be looking at a theoretical max of 15A draw per line, so 1.5mm H07 should cope with the current. From your experience is it simply not worth having fuse protection on the tape side of the PSU? or just go for a much lower rating?
  23. I was afraid this might be a (sensible) suggestion. I'll re-design to keep the power and data separate right to the point of joining the tape then, having a couple of power outlets per "power injector" enclosure and only daisy chaining the data.
×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.