Jump to content

Bob_Cambridge

Members
  • Posts

    3
  • Joined

  • Last visited

Posts posted by Bob_Cambridge

  1. I saw but how do you get the software, and can it change frequencies?Also is there a diagram for the lead pinouts? I have googled extensively and can find no mention of this cable or its wiring.Bob

     

    Hi, I just posted today about programming S4.5 reciever frequencies

    See post #16 above

  2. Hi, I just posted today about programming S4.5 reciever frequencies. I am an Engineer, and happy with soldering, is this something you chave info on?

    Kindest TRegardsBob

    I currently have it working and have had issues like you.

     

    There is another way to program these systems not using a parallel port but it depends how much time you want to spend soldering and making cables.

     

    feel free to contact me if you want some advice, happy to help

     

    Graeme

  3. Hi All,I have a couple of trantec S4.4 handheld mics, and a couple of S4.5 recievers.The mics use the following channels.1 863.1502 863.7253 864.1504 864.850

    The recievers are the earlier ones, which only have one CH70 frequency overlapping with the mics, 863.725Mhz.The later ones had all 4 the same.Does anyone know if its possible to reprogram these recievers to do this? They have a 9 pin Mini-Din on the rear, marked Data, which the manual has no info on.I know the S4000 recievers (which I think this is varient of?) had programming software, and a lead for thispurpose.I have searched the forum but found nothing more than references to its existance.

    Can anyone help please?

    Kindest regards

    Bob

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.