MickieMackieMoo

Trying my luck here... Any one got any spare housing plastics for the following (or even dead units)

High End Studio beam (pc beam), High End Studio spot 250,High End Studio colour 250

I recon I have 6/7 units that work fine, its just the casing's are trashed or have been pillaged .....Have plenty of yoke arm covers spare!!

 

thanks

I’ve been suppling and operating lighting and sound equipment in the same venue / hall for 20 years, However new office folks are now asking me to ensure all equipment is now pat tested before being used at z place.

I have a detailed catalogue/inventory for all the equipment down to each power cable.

I maintain them thoroughly, practically stripping and rebuilding my moving heads units every 3 months for example. Which is all logged and detailed!

I would say my maintenance is much more thorough than a bog-standard pat test and documented(hoping this will suffice)  

Have any of you come up with other ways to satisfy venues without pat testing?

21 hours ago, david.elsbury said:

Jst connectors?

That's the name of the buggers.... Couldn't remember for the life of me

Some time ago I ordered a load of these style white plugs with around 6 inches of cable to repair moving light looms

its been that long since I repaired a loom, that I've forgotten the name of this style connector and where I got them from.. Any pointers ? 

Picture is just an example of the plug looking for various sizes, 

Link to picture

Getting closer.   It goes from a motherboard USB header like the arrow on the left to >>> 2x small white connectors on the right

Link to picture here!

I'm having a good old browse online. the cable doesn't like anythink special 

Any one have any spare parts kicking around for a Hog Ipc/ Old hog bits

I require the USB cable that goes from PL7(board with the faders) to the motherboard!
 

See link below to picture of cable / what im on about
https://1drv.ms/u/s!An1COVzRBPl8gsVKm_2PRzO3DOCX2Q?e=PdYR8C

Yeah it has two switches either end.. crimp had popped off the switch

Result.. nice easy fix

Question regarding FOER (Focus time-out)

Martin Mac 550

Yet to get the fixture back to look at never, had this one come up... what have people done to overcome it....