alangeering
-
Posts
83 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Blogs
Downloads
Gallery
Store
Posts posted by alangeering
-
-
1. Most recently used to paint the walls of a church for Christmas services. Used a company to transfer digital images to slides.
2. Liesegang Fantimat 250 AF and Braun Paximat Multimag 250 S-AF.
3. None
4. Not knowing how long a 35mm transparency would last in a 250w projector. It lasted the 7 hours I needed.
Total cost was £2.50 each for the slides and £11.99 for the two projectors off ebay.
HDMI over cat6
in Video & Projection
Posted
@Joe What is the typical latency of the ProDSX from encoder to decoder via one network switch?
My experience so far:
Cheap Video over IP = lots of latency (i.e. HDBitT).
Expensive Video over IP = good latency (i.e. SDVoE).
Vapoureware Video over IP = still waiting (i.e. TICO based products)
Where does Octava ProDSX fit? (cost/latency)
There are places where I don't mind higher latency and cheaper products are OK. Right now I'm looking for an alternative to HDBaseT/SDI that is low latency enough to feed a projector showing live video of what's happening on a stage just below it. Latency will be very noticeable in this application.
Thanks!