andrew.p.r

Thanks All, Looks like its time to break out the 3D printer and order some generic capsules see what results I Get, if I find something suitable I shall report back

Morning all,

A theatre I work with has a number of conford headsets where the mics have been damaged does anyone know of a more cost effectiv option for replacement that the official canford capule?

Thanks

Andy

Has there been any exploration into a wireless version of bluecom at all or is this well outside the realm of this project?

I've used an isolating transformer on the headphone O/P.

 

 

If you are making a unit for the specific purpose components can be left out. If all you require is to inject the intercom into an amplifier for show relay, then all you need is an isolating transformer and a decoupling capacitor between ground and bus pins [1&3] of the intercom line loop and not a belt pack at all.

Evening,

 

A while ago I built up some V1.2 boards and the PSU not had a chance to use them in anger yet as have recently been in venues with systems already.

 

I was wondering though if it was possible to get a line level audio feed out of the beltpack board so I could hack one up to be show relay for one of our dressing rooms?

 

Thanks

 

Andy

That sounds perfect, Thanks for your help.

Andy

Evening,

A while ago I built up some V1.2 boards and the PSU not had a chance to use them in anger yet as have recently been in venues with systems already.

I was wondering though if it was possible to get a line level audio feed out of the beltpack board so I could hack one up to be show relay for one of our dressing rooms?

Thanks

Andty

Excellent.

Thanks

Andy

As I'm sure lots of venues are doing I'm donig maintenance, and have come to the comms system some of the foam ear pads are very tired having just had a look on canford these are £40 + VAT this seems extreme has ayone found any cheaper alernatives that do the job ?

Thanks

Andy

I appreciate this threat is old but wondering if you still had these?

Thanks

Andrew

Hi Gareth,

 

I've got a circuit diagram dated 1997 that may be of use. Drop me a PM with your email address and I'll fire it over.

I also know of someone that has on picture can be seen here

https://scontent-lhr8-1.xx.fbcdn.net/v/t1.0-9/53735642_396920110888329_7264194607108325376_o.jpg?_nc_cat=111&_nc_ohc=XedSKYc4Qc0AX9P_vr5&_nc_ht=scontent-lhr8-1.xx&oh=4e528901d307216474567bb3caffeb6f&oe=5ECD99A3

Contact details https://www.facebook.com/bespokestage.co.uk/

Has anyone had any joy using the 4pole 3.5mm jack with a headset yet?

I just plugged in a phone headset I had kicking around and it burnt out R8 as soon as it was plugged in.

Thanks

Andrew

Anyone got any recommendations of where to got some of the belt pack board made as this is not something I've looked into before.

More than happy with the soldering and assembly just need the boards.

Thanks

Andrew

Will anyone be doing a bulk order of the board's and panels for the belt pack?

Thanks

Andrew

What is the recommended PSU amp wise to drive this?

Thanks

Andrew