zahoorjury

8 minutes ago, niclights said:

It looks like it is Seven Stars/ Big Dipper/ Betopper which are all the same company and use the same product codes:

https://betopperdj.com/pages/company

There is a manual here:

https://www.manualslib.com/manual/2826839/Betopper-Lpc007.html

Unfortunately it doesn't look like there are any options in the menu to calibrate the colours.

No harm in trying to contact them but I suspect it doesn't have this feature and it will just be a matter of adjusting it in the controller.

https://www.bigdipper-laser.com/contact.html

So thanks 🙏 for your reply & suggestions sir 

7 hours ago, david.elsbury said:

Looks like they may be made by Betopper, and rebadged. Probably not a snowballs chance, but maybe try and reach out to them… https://betopperdj.com/products/betopper-54x3w-rgb-3-in-1-full-color-led-par-light-lpc007

Actually sir , Thais just a kind of reference, I have some Generic led parcan from China 🇨🇳 with no Brand name on it and the DMX CH positions are 

1, Dimmer 

2, Red

3, Green 

4, Blue 

5, Strobe 

6, Automatic 

so, really I need the bios settings to get into the colour amount correction 

On 12/9/2023 at 10:26 AM, david.elsbury said:

 

On 12/9/2023 at 10:26 AM, david.elsbury said:

You’re going to need to tell us which led par it is exactly, before we have a chance of helping…

20 hours ago, david.elsbury said:

You’re going to need to tell us which led par it is exactly, before we have a chance of helping…

 

20 hours ago, david.elsbury said:

You’re going to need to tell us which led par it is exactly, before we have a chance of helping…

 

Hi there, if any one help me to get into the 6 channels RGB led parcan bios settings, I need to correct the red colour amount , the led I have is Chinese, once I been in china 🇨🇳 there’s local lights engineer was doing the colour amount correction to crest pure White colour while we do RGB all at 100% , 

hope any one of you can help 

Hi , any one remember the main Password of this COEF Master Disco 96 , actually I turned it on after more then 8 years, it’s user lock and of course I forget the password, 😍😍😍😍😍😍😍😍

Hi Allen , I surly done all these what advice but nothing happening, and by the way what are these instructions on the manual, please have a look below ⬇️None of the describe hardware is present there, please check my previous upload pics .

Hi all , I need Lite puter EDX 1212A in Dimmer mode rather than Switching mode , I tried each and every possible step according to its manual but Dimmer/ Switching box is stuck in Switching mode , one more thing that the manual says to adjust some hardware jumpers settings inside but the physical inside is different from explains by manual, any suggestions? 

Hi all , is it possible to connect T500k led programmer to any of our DMX lighting Desk ( Pearl , Tiger Touch or GMa2) to control only playbacks .

regards 

Thanks Nic & Tim

Hi Tim , I also posted my issue at avo forum yet there is no reply from any one there, I am from Pakistan, what do think how can avo help me on the phone?

I've been using Tiger Touch V9 for a while and recently I'm facing this problem, Whenever I boot my Controller, initially it works fine but after 10 to 5 seconds, all of the panels stop functioning including the touch screen, even the "mode" switch too. It's seems all ok in appearance and nothing has been damaged apparently.

Someone please tell me what to do of this problem I'm facing...

Thanks guys for your replies.

Hi all , I need help on compulite vector to creat a all new fixture personality, and how can I add this new personality in the existing library of console , any clue ?

Regards

hi all , thanks for the previous help. hoe can I change the view angle ( degree ) in wysiwyg isometric view , now its is showing me a near like TOP view and I need it to more tilt up angle .thanks

I have a command & a fader wing now , but I don’t know the whole process that how to control Resolume with GMA2 pc on same pc or an external pc , do I need a specific GMA2 art-net device or I can use any other brand but , still wants to know how to get link any of these things with GMA2 pc , any link or help is highly appreciate.

Yes I do and how can I help you?