Metro CBP1 toggle switch part

[Mr Steve]

Hello,

 

I was wondering if any of you know of the part number for the toggle switch on a Metro CBP1 beltpack which latches on for the mic, but is also momentary contact for push-to-talk? I can't quite find one online with the right combination of right angle connection, latching and momentary!

Thanks!

[kgallen]

Can you disassemble the unit to get some photos/specs on the switch? How many poles? PCB mount or not? If PCB mount, is the momentary the push-away from the PCB?

 

It will be something along these lines as I'm sure you've already determined, but without a bit more of a spec, I'd be guessing even more...

 

https://uk.rs-online...itches/8780353/

 

I can find a few (on)-off-on switches with flattened actuators but they seem to be non-PCB mount.

 

 

Oh hold on - here's the real-deal, but it's 8 quid! https://www.granites...gle-switch-ptt/

 

 

Digging a bit more, I found this Farnell datasheet (http://www.farnell.c...ets/2626614.pdf) and from that I would say the switch is an APEM 5238WW, plain bushing, lever option "-9".

 

Kevin

Edited November 12, 2019 by kgallen

[Mr Steve]

Ah perfect, thank you. Spot on.

[Mickstup]

I'm looking for a bulb for the call switch, £9.99 on the Granite website, I cant find anything similar, any ideas, thanks in advance.

[kgallen]

I'm looking for a bulb for the call switch, £9.99 on the Granite website, I cant find anything similar, any ideas, thanks in advance.

Don’t know but I moded our Tecpro’s to use a 5mm LED which saw an end to that problem...

Edited November 18, 2019 by kgallen