Beckirk94

I’ll give that a try when I get home, thanks! Did they have other lights working on the desk. if so take one and use it to test the desk. I assume you mean Eurolight LC-2412 Also did you get the desk 2nd hand. I know some times the socket on the desk can give bother and replacing it would fix some of the problems. As Gerry said are you sure the 5-3 adaptor works. I know I bought one before and it was wired for a old Avolite desk which was odd. The proper wire is 1-1 2-2 3-3 The one I had bough was wired 1-1 4-2 5-3. Yeah sorry 2412 - brain frazzle!! It was second hand, I didn’t pick it up but I believe everything was working, I did think it might be the adapter, I’ll try a new one when I get home tonight - unfortunately it’s all in my living room and I don’t have any spares or lights to test anything! Thanks for your help! Did they have other lights working on the desk. if so take one and use it to test the desk. I assume you mean Eurolight LC-2412 Also did you get the desk 2nd hand. I know some times the socket on the desk can give bother and replacing it would fix some of the problems. As Gerry said are you sure the 5-3 adaptor works. I know I bought one before and it was wired for a old Avolite desk which was odd. The proper wire is 1-1 2-2 3-3 The one I had bough was wired 1-1 4-2 5-3. Yeah sorry 2412 - brain frazzle!! It was second hand, I didn’t pick it up but I believe everything was working, I did think it might be the adapter, I’ll try a new one when I get home tonight - unfortunately it’s all in my living room and I don’t have any spares or lights to test anything! Thanks for your help! Did they have other lights working on the desk. if so take one and use it to test the desk. I assume you mean Eurolight LC-2412 Also did you get the desk 2nd hand. I know some times the socket on the desk can give bother and replacing it would fix some of the problems. As Gerry said are you sure the 5-3 adaptor works. I know I bought one before and it was wired for a old Avolite desk which was odd. The proper wire is 1-1 2-2 3-3 The one I had bough was wired 1-1 4-2 5-3. Yeah sorry 2412 - brain frazzle!! It was second hand, I didn’t pick it up but I believe everything was working, I did think it might be the adapter, I’ll try a new one when I get home tonight - unfortunately it’s all in my living room and I don’t have any spares or lights to test anything! Thanks for your help!

Yeah reset it first, cleared the patch and the channel assignment/DMX addresses all seemed to be set fine but just can't get any life at all!

Trying to help out a friends band with a few extra lights but struggling to patch this desk! Just have a few cheap LED pars, I've gone into patch and set channel 1 to address 1, also tried a 1-1 patch and nothing seems to be working! The CH flash light is on and it's in preset mode. A + B + master are up… blackout button isn't on.. not sure what else to try, just picked up the desk and using a 5 to 3 pin adapter. The units and DMX are working with another desk so I know they're not the problem. Tearing my hair out a bit - any help appreciated! Thanks