I've got a Acme/iSolution iMove 8S moving head fixture that I bought a few years ago very cheaply as it was missing the LED/Control Panel PCB. The fixture is otherwise complete and in quite good condition. The fixture is clearly working as it starts up in show mode and spins around whilst changing colour and gobos. I ideally want to put this into DMX mode and be able to set the address using the menu. I was planning on trying to reverse engineer the main PCB to work out the schematic of the LED PCB and design a replacement. It seems like it will be quite a bit of effort so I was wondering if anyone had a fixture that they would care to take apart and take a photo of the top and bottom of this PCB for me? I would be incredibly grateful and happy to see this fixture back in use again. The control panel pcb should be reasonably straight forward with the 4 seven segment display blocks, 4 leds for status and four press buttons.
