Hi All, My unique 2.1 has stopped outputting haze for some reason. Upon further inspection when in manual mode with the pump set to 99%, I am only getting a continuous 32-45v from the two black cables supplying power to the fluid pump (I have purchased a new fluid pump but that has made no difference). Is this the correct voltage? as the rating on the pump is 230v. After running the hazer for a few minutes the thermal cut out on the heating element cuts out. The only thing I haven't checked is the air pump. Could this be the cause of the tripping and no haze output? Hope you can help, any suggestions appreciated. Thanks, Alex