| The Blue Room Electrical & Power Forum, and the equivalent sections of the wiki, are provided for the informal description and discussion of electrical and power-related technical production matters. No warranty is implied concerning the accuracy of any information contained therein. The administrators of this site can accept no responsibility for any inaccuracy of information in the Electrical and Power Forum or wiki, or for any loss, damage or injury arising from any interpretation of its contents. Opinions expressed are not necessarily those of the site administrators. If in doubt, consult a qualified professional. |
In the UK the use of electricity at work is regulated, the HSE guidance on Electricity at Work may be downloaded at this link: [1]
Note: about 8% of fatalities at work are caused by electric shock, (12-16 employee deaths) 210-258 Major Accidents and 500 over three day accidents each year.
Using FE Birds 1969 triangle that is: 5000 minor injuries, 15,000 Damage Accidents & 300,000 near miss accidents every year in the UK due to electricity at work!
Contents |
I need to make up some single-phase extensions. What cable should I use?
16A 1P+N+E TRS - 1.5mm2 or 2.5mm2
32A 1P+N+E TRS - 6.0mm2
63A 1P+N+E TRS - 10.0mm2 or 16.0mm2
125A 1P+N+E TRS - 35.0mm2
I need to make up some three-phase extensions. What cable should I use?
16A 3P+N(+E) TRS - 1.5mm2 or 2.5mm2
32A 3P+N(+E) TRS - 6.0mm2
63A 3P+N(+E) TRS - 16.0mm2
125A 3P+N(+E) TRS - 35.0mm2
What is Three Phase Power
See Three Phase
What are RCDs
See RCD

Sign In
Register
Discussion
Discussion