CraigG Posted December 2, 2016 Share Posted December 2, 2016 Hi all, just a little query. I've recently just bought my own MQ60. Did some brief bits on it at home for about 20 mins and then when I was finishing just unplugged it before I'd shut it down and it died straight away, no UPS "power has been lost" etc message. Is this because being a new console the UPS will need to charge from empty? How long would that roughly take for reference. Or is this a problem... Cheers Link to comment Share on other sites More sharing options...
jameschamsys Posted December 3, 2016 Share Posted December 3, 2016 Hi Craig, This does not sound normal. When you power on the MQ60 if you look on the rear of the console just above the powercon connector you'll see a red flashing LED. How fast does this flash? If its a steady once a second then this indicates the UPS is functioning as expected. If its much faster it indicates a UPS fault.Drop me an e-mail direct or to (support 'at' chamsys.co.uk) or give me a call in the office and we'll get this sorted for you. James Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.