sleah Posted September 19, 2018 Share Posted September 19, 2018 Quick question..... what would be the simplest/cheapest way to use an ETC Colorsource profile outdoors allowing for all weather? (to do gobo projection) CheersSimon Link to comment Share on other sites More sharing options...
ImagineerTom Posted September 19, 2018 Share Posted September 19, 2018 Dome You can get hard plastic ones or inflatable ones - make sure the hire company knows what's going inside so they allow enough clearance around it for the air circulation / heat dissapation Link to comment Share on other sites More sharing options...
timsabre Posted September 19, 2018 Share Posted September 19, 2018 Dome is the best but for cheap you can make some sort of roof over it ... like a rabbit hutch, and project out of the open side. They don't get very hot but you need to keep rain out of the fan vents. If you can get away with just white light, Chauvet do an IP rated LED S4 knockoff (Ovation E-260WW IP) which works well, I don't know why they don't do a colour LED version. Elation do similar in WW and CW but not colour. Link to comment Share on other sites More sharing options...
gyro_gearloose Posted September 19, 2018 Share Posted September 19, 2018 Amateurs, the lot of you! Real technicians waterproof their lights like this!! :** laughs out loud **: Link to comment Share on other sites More sharing options...
bigclive Posted September 20, 2018 Share Posted September 20, 2018 Amateurs, the lot of you! Real technicians waterproof their lights like this!! <img src='http://www.blue-room.org.uk/public/style_emoticons/<#EMO_DIR#>/laugh.gif' class='bbc_emoticon' alt=':** laughs out loud **:' /> I bet that Mac's lamp ballast still exploded anyway. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.