Posted 15 April 2012 - 09:32 AM
Posted 15 April 2012 - 02:11 PM
but seriously, there are many different variables and questions about your situation.
If it's important, explain your situation in detail so we can see if you have any other options
or you'd best get on with the praying.
This post has been edited by jason5d: 15 April 2012 - 02:22 PM
Posted 15 April 2012 - 07:18 PM
when its runing select an input and in the top left you will get a box top left with the lamp indicators. yellow is on, grey is off, red with a cross is failed. If you dont get this check that "display" is on. Power the unit down and swap the problem lamp with another, then power up again If the problem moves with the lamp, good, you can fix it with another lamp, if it stays with the lamp slot, you need another unit as you likely wont be fixing this. Its worth checking all the molex connectors to the main board are connected if you have the top off, but if they are it needs proffesional help.
Filters are an irrelevance as are the lamp timers, My best guess is you are stuffed as ive had the same issues with xf units and its off to the repairers for them, its generally a quick and cheap fix, but that probably doesnt help you. id be getting the hire co to be sending a spare out asap.