Hello All, I used to control my lighting system in my music studio using Luminair running on an ipad, which was recommended by a user of this forum and it has worked brilliantly. I have a Chauvet DMX AN which was connected by ethernet to my Ethernet Switch. I also had a wireless access point connected to the ethernet switch. The ethernet switch was connected to my router and thus provided the internet for the studio. The DMX AN was sending DMX to my LED controller which sent control signal and power to 5 different RGBW LED lights I built from scratch. I've now moved and want to use the same setup but I no longer have a dedicated wifi network and hardware for the room like I used to. I'm in a house so get my internet from the house wifi. So to use my old hardware & software setup to control my lights I would need to set up a new wifi network just for the Ipad to be able to get a signal to the DMX AN. So I'm wondering if I buy a simple wireless access point and plug this direct into the DMX AN, will this give me what I need? Or do I need something between the AN and the WAP? I'm also wondering if I can get a wireless DMX transmitter for the ipad and plug a receiver straight into the LED controller, thus I no longer need the DMX AN or the dedicated Wifi network. Thanks for your time reading and to those who share their opinions.