Jump to content

Dance Floor


Recommended Posts

Hi

 

I need to re-tape our Harlequin Dance floor in our Dance studio, but at the moment it is joined together by several layers of gaffa tape. As previous people have applied more tape over the top of the original layer of gaffa, there is now about 5 layers of gaffa which is approx 3 years old.

This is going to be quite a job to get up. Has anyone got any suggestions on removing gaffa tape and residue from dance floor with ease. I've had suggestions to use meths and a steam cleaner...whats the general consensus here

Link to comment
Share on other sites

I understand that with hard work and a bit of time a stick with a nail in it aimed at the people who did this might get it removed.

 

But, I have used this http://www.lakeland.co.uk/8976/Sticky-Stuff-Remover before , This might be the better thing, http://uk.rs-online.com/web/p/precision-cleaners-degreasers/7575097/ removed as much of the tape as possible (slow and steady) and apply have a brew, and slowly rub away, plenty of tissues or cloths will be needed.

 

I don't think it needs to be said that use some dancefloor tape from lemark next time.

Link to comment
Share on other sites

Rosco make a dancefloor lacquer stripper that I have found quite good on taking up tape residue. A proper rotating scrubber may help.

 

 

I was under the impression that something like that could damage it.

 

I didn't realize it was just white spirit, is that what the stuff in a can from RS is?

 

We use some stuff called Label off, but seems to be only Swedish, works great for double sided tape on scissors.

Link to comment
Share on other sites

The rosco stuff is a detergent, designed to be mopped on, scrubbed with a light pad (white or blue from memory), and leaves floors substantially cleaner without damaging them.I'd be concerned at using white spirit on a rubber dance floor, I'm sure Simon Lewis could educate us on the chemical issues that could arise, with the solvent potentially changing the properties of the floor.
Link to comment
Share on other sites

Talk to Harlequin and ask what they recommend. That's what we did. We have two cleaners, one is just a detergent and the other is solvent based. Both of them friendly to the type of floor we have.

 

The solvent based one requires a number of fans to blow the fumes away or suitable masks, it's really strong.

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.