Jump to content

MickieMackieMoo

Regular Members
  • Posts

    57
  • Joined

  • Last visited

Previous Fields

  • Member Status
    Not Selected
  • Current Employment or place of study
    Work for myself covering hertfordshire and surround areas, lighting work for bands, productions etc.. + just about anythink
  • Professional organisation membership
    n/a
  • Full Name
    Michael Munford

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

MickieMackieMoo's Achievements

Full-timer

Full-timer (6/14)

  • Dedicated Rare
  • First Post
  • Collaborator
  • Conversation Starter
  • Week One Done

Recent Badges

  1. Trying my luck here... Any one got any spare housing plastics for the following (or even dead units) High End Studio beam (pc beam), High End Studio spot 250,High End Studio colour 250 I recon I have 6/7 units that work fine, its just the casing's are trashed or have been pillaged .....Have plenty of yoke arm covers spare!! thanks
  2. I’ve been suppling and operating lighting and sound equipment in the same venue / hall for 20 years, However new office folks are now asking me to ensure all equipment is now pat tested before being used at z place. I have a detailed catalogue/inventory for all the equipment down to each power cable. I maintain them thoroughly, practically stripping and rebuilding my moving heads units every 3 months for example. Which is all logged and detailed! I would say my maintenance is much more thorough than a bog-standard pat test and documented(hoping this will suffice) Have any of you come up with other ways to satisfy venues without pat testing?
  3. That's the name of the buggers.... Couldn't remember for the life of me
  4. Some time ago I ordered a load of these style white plugs with around 6 inches of cable to repair moving light looms its been that long since I repaired a loom, that I've forgotten the name of this style connector and where I got them from.. Any pointers ? Picture is just an example of the plug looking for various sizes, Link to picture
  5. Getting closer. It goes from a motherboard USB header like the arrow on the left to >>> 2x small white connectors on the right Link to picture here! I'm having a good old browse online. the cable doesn't like anythink special
  6. Any one have any spare parts kicking around for a Hog Ipc/ Old hog bits I require the USB cable that goes from PL7(board with the faders) to the motherboard! See link below to picture of cable / what im on about https://1drv.ms/u/s!An1COVzRBPl8gsVKm_2PRzO3DOCX2Q?e=PdYR8C
  7. Yeah it has two switches either end.. crimp had popped off the switch Result.. nice easy fix
  8. Question regarding FOER (Focus time-out) Martin Mac 550 Yet to get the fixture back to look at never, had this one come up... what have people done to overcome it....
  9. Question aimed for those that have repaired mac550 probably the same on the 700 Regarding the mini fans in the head next to UV filter, I have 6 or so where the wire (in the heatshield) is fried to a crisp.... I am talking about the cable that passes around the back of the UV filter to the PCB The lights I have I don't think have ever had proper servicing or any love at all really..... So my question is this common??, and have you taken any measures to try to prevent it....if so what?? Picture if it helps
×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.