Mark-the-gib Posted March 1, 2018 Share Posted March 1, 2018 Hi, I have a bit of an odd issue with our Antari Faser 310 pro. It seems that when I set it to timer or use it via DMX the output volume is very low, at least 50% lower than it should be when set to full. However when I manually release it by holding down the 'manual' button the output seems to be normal. Does anyone know what the hell is going on!? Thanks in advance Mark Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.