Jump to content

Cue lights


bibdybopdramaclub

Recommended Posts

For only one outstation, I would go to Maplins, buy a couple of small ABS boxes, a few switches and LEDs and practice soldering - it's a skill that will get you out of all kinds of problems throughout your life.
Link to comment
Share on other sites

1397226252[/url]' post='497617']

For only one outstation, I would go to Maplins, buy a couple of small ABS boxes, a few switches and LEDs and practice soldering - it's a skill that will get you out of all kinds of problems throughout your life.

 

Can I just electric tape them together

 

1397226252[/url]' post='497617']

For only one outstation, I would go to Maplins, buy a couple of small ABS boxes, a few switches and LEDs and practice soldering - it's a skill that will get you out of all kinds of problems throughout your life.

 

Also can you send me some basic instructions on how to do this

Link to comment
Share on other sites

1397227286[/url]' post='497619']

Is this a permanent solution? If it's just one outstation, would some other form of communication be easier?

 

Here are some basic schematics from the Wiki;

 

http://www.blue-room...wiki/Cue_Lights

 

Please see the above post about going to maplins I am a complete novice and want instructions on how to make a cue light system with the items he suggested ( with a battery of course)

Link to comment
Share on other sites

Does the outstation need to be able to acknowledge a standby or is it simply there to display a standby and then a go? If the latter, you're essentially just wiring a battery, switch, resistor and LED in series - something that I'm sure even GCSE science would cover. The top circuit in the wiki that ddproduction linked to is the one to go for.

If you need an acknowledge, it's a little more complicated.

Link to comment
Share on other sites

1397227795[/url]' post='497621']

Does the outstation need to be able to acknowledge a standby or is it simply there to display a standby and then a go? If the latter, you're essentially just wiring a battery, switch, resistor and LED in series - something that I'm sure even GCSE science would cover. The top circuit in the wiki that ddproduction linked to is the one to go for.

If you need an acknowledge, it's a little more complicated.

 

It's just to display the lights

 

1397228005[/url]' post='497622']
1397227795[/url]' post='497621']

Does the outstation need to be able to acknowledge a standby or is it simply there to display a standby and then a go? If the latter, you're essentially just wiring a battery, switch, resistor and LED in series - something that I'm sure even GCSE science would cover. The top circuit in the wiki that ddproduction linked to is the one to go for.

If you need an acknowledge, it's a little more complicated.

 

It's just to display the lights

 

Would I need wire as well because I need a master station and an out station about 2m from each other

Link to comment
Share on other sites

Would I need wire as well because I need a master station and an out station about 2m from each other

Yes - I skipped over that as I assumed that was fairly self-evident. You can use just about any type of wire as you're only dealing with battery power. It'll need to be at least two core; something intended for small speakers would be perfectly adequate.

To elaborate slightly on my previous post, using the first circuit on that wiki page would give you one light; making it twice would give you two. The second circuit is the more elegant way of getting two working with only one switch whilst still only needing a single two-core cable.

Is this is a school project, possibly with a deadline looming?

 

Edit: spotted the second circuit needs AC... I'll scribble out a circuit on NapkinCAD.

Link to comment
Share on other sites

 

Would I need wire as well because I need a master station and an out station about 2m from each other

If they are only 2 mtrs apart do you really need a cue light system?

You can see each other or almost poke each other at that distance.

Unless it is a homework project that has to be handed in on Monday?

Cheers

Gerry

 

Cheers

Link to comment
Share on other sites

I'm a little confused too, but really because simple circuits with a lamp, a battery and a switch were always in GCSE. When I hadn't learned to solder, block connectors, twisted wires and lots of tape always worked - at least for a while.

 

We always get complaints because we always seem to say "if you are asking, you should't be doing this" - but that's usually when dealing with mains electricity, heavy weights, rigging and dangerous substances.

 

Two lights and two switches, 2m apart, has GOT to be a wind up? If I couldn't solder, I could go to B&Q and buy a two way lightswitch with screw terminals - if I was that stuck, but everything is in marlins, and in my local Maplins, a couple of the guys would sketch the circuit on a piece of paper, pick the bits for you and you could knock it up.

 

 

Must be a wind up!

Link to comment
Share on other sites

For what it's worth, here's the circuit I'd suggest:

 

http://i1219.photobucket.com/albums/dd434/Sheriton/IMG_20140411_164843_zps25d5d5fb.jpg

 

Components on left in the "master station" box; those on the right in the "outstation". I'm sure your science / design tech teacher will be able to help you understand how it works and how to wire it up.

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.