labby

Hi all I'm looking for a bulb for a strand lighting fresnal light. Any ideas where I can find them please. MINIM F.

Thank you I will try tomorrow and see how I get on

Hi guys, I got 20 of the lamps below and have fitted 19 of them with no problems. The final lamp comes on in pink not white and I can't work out why. DMX address is correct as is the number of channels. Even setting it the same as the one next to it didn't help. Any ideas please ? https://www.thomann.de/gb/stairville_hl_x90_rgbw.htm

Thanks for the help I will look into it

Hi all, I'm looking for a fixture file for a stairville HL-x90 fixture. I'm trying to patch them to a Chamsys quick 30 desk but the fixture isn't listed. Any help would be greatly appreciated.

The coverage is poor and spotty. They are 10 years old so colour is different due to blues and greens going. The stage is 20ft x 20ft and lights are at approx 12 ft above the stage on 4 bars I currently have 9 stairville par 56 led lights on each of the back 3 bars and 4 par 64 on the front bar with some non led 56s. All other lights are on a bar above the audienc mainly non led. https://www.mlt.org.im/news/manx-lottery-trust-supports-peel-centenary-centre/

Hi all, I'm looking to replace 40 LED stairville par 56 lamps on a small stage. Not a massive budget but need something with a better colour wash. Any suggestions would be greatly appreciated. I'm based in the UK. Thanks in advance

Hi all. I updated the software on my quickq30 and now it's stuck in operator mode and won't accept the admin password. please help

hi all im looking for a fixture file for my quickq 30 desk. its for a Eurolite LED MF-6 flower effect lamp. it all works on the dip switches but cant find it in the fixtures. any help would be appreciated I include a link to the user manual My link

Hi, does anyone use one of these desks who can tell me how to stop the lights flashing over the empty faders,? They are extremely bright and in cue and group mode they flash different colours.im just getting used to it but can't figure out why this is happening.

im looking to get some new lights to improve the colour on the cyc. the bar is 12ft above the stage and approx 3ft from the cyc. im looking for LED and with the ability to create some effects. any help would be appreciated

thanks everyone all working fine now, wrong fixture was patched

Please help. I have a stairville mh-x25,When I open the shutter and put intensity at 100% there is no light. If I set it moving the light comes on and rotates through colours and gobos. Any ideas what's going on?

Hi all ive just got a new chamsysq 30 console and im having a couple of problems. after patching my fixture into it I found that the multi function faders are operating some of the LED lights even though they are patched way above the chanel number of those faders. can anyone explain what is happening? secondly, on my zero88 I patched the starcloth onto the faders as a dimmer but cant do this on the new console, any help would be greatly appreciated