Hafeez Ahmed Posted October 23, 2018 Share Posted October 23, 2018 Hello!I recently purchased lc2412. I wana ask some features about it. I wana control 4 par lights which have different addresses.After assign dresses to channels like1st Par = CH1-0012nd Par = CH2-0023rd Par = CH3-0034th Par = CH4-004when I make scene of light 3rd or 4th light then it interrupt 1st or 2nd Par. Thats' why I arrange the address sequence like 1-0012-0123-0254-037 I add these sequence of addresses with difference of 12 numbers because in this way no one address can mix with each other.I can control now from 1-12 for 1st par light and 13-25 for 2nd light but,How can I control DMX 025 and 037 address of par light.Like if I wana on red light of all par lights with these sequence of addresses then what should I do? Or How to add addresses and chase like this video. Please help! Link to comment Share on other sites More sharing options...
Gerry Posted October 23, 2018 Share Posted October 23, 2018 A lC2412 will only control a maximum of 24 channels. So anything with a DMX address above 24 will be ignored.How many channels does each Par light need?If it is 6, or less, than you can use the LC2412 to control them all.CheersGerry Link to comment Share on other sites More sharing options...
timsabre Posted October 23, 2018 Share Posted October 23, 2018 Just to expand on what Gerry said, if your par lights for example need 6 channels you would set the addresses at 001, 007, 013, 019Can you identify the manufacturer and model of par light you are using and we can probably find out for you how many channels each one uses? Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.