DonkiDonki Posted April 26, 2017 Share Posted April 26, 2017 Another question to the experienced Avo users;Is there an easy way to pause running fx? (To allow long exposure photography of a current look)On my regular system (MagicQ) you can press Pause on any playback and the stack & the fx can be paused which makes this an easy task. Is there a similar method on Titan? (A Quartz this time)Cheers http://www.blue-room.org.uk/public/style_emoticons/default/rolleyes.gif Link to comment Share on other sites More sharing options...
niclights Posted April 26, 2017 Share Posted April 26, 2017 You can use rate masters to achieve this. If you want to pause everything just assign a rate grand master or if you need some separation then assign some individual rate masters and assign them to the playbacks as required. Pulling the rate master fader to zero will pause but to streamline this (and not use faders if you would prefer to keep them free), you could change the key profile of the master to be latch. If you also set the scale to be 0-100% (via Playback Options) then hitting the button will toggle between go (100% speed) and pause (0% speed). Link to comment Share on other sites More sharing options...
DonkiDonki Posted April 26, 2017 Author Share Posted April 26, 2017 You can use rate masters to achieve this. If you want to pause everything just assign a rate grand master or if you need some separation then assign some individual rate masters and assign them to the playbacks as required. Pulling the rate master fader to zero will pause but to streamline this (and not use faders if you would prefer to keep them free), you could change the key profile of the master to be latch. If you also set the scale to be 0-100% (via Playback Options) then hitting the button will toggle between go (100% speed) and pause (0% speed). Thanks for that tip. http://www.blue-room.org.uk/public/style_emoticons/default/biggrin.gifOut of interest, does the rate grand master override the actual rate of the various running fx or just controls them 0-100% relative to their programmed rates? Link to comment Share on other sites More sharing options...
niclights Posted April 26, 2017 Share Posted April 26, 2017 It's a relative control. Link to comment Share on other sites More sharing options...
DonkiDonki Posted April 26, 2017 Author Share Posted April 26, 2017 It's a relative control. Good to know, thanks again. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.