BobJ Posted July 17, 2018 Share Posted July 17, 2018 We need to temp replace a mono channel in our sound system. Question; If we place the Behringer KM750 in Bridge mode (which we are happy with) will the inputs be switched to parallel? i.e. Can we just input to CHAN A and have that sent to both amps or do we need a splitter to feed the mono line into both A and B. I did this a while back and forgot! Link to comment Share on other sites More sharing options...
timsabre Posted July 17, 2018 Share Posted July 17, 2018 If you put it in bridge mode it'll run one of the channels out of phase, this will sound weird. Use a splitter cable. Link to comment Share on other sites More sharing options...
bruce Posted July 17, 2018 Share Posted July 17, 2018 I would have thought you’d just put the switch to “bridge” and use a single input - the one labelled “mono”. Link to comment Share on other sites More sharing options...
timsabre Posted July 17, 2018 Share Posted July 17, 2018 Oh.... are you trying to drive one speaker or two?If one, Bruce is correct and ignore me Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.