Jump to content

Soundweb 9088iis + BLU6 wallplates


alstewartle

Recommended Posts

Having some issues getting the BLU6 wallplates to behave correctly with the older SoundWeb green units, I know I've 'fudged' it in the past - but can't remember exactly how. The issue seems to be that even if you use an 8 way source selector with the control inputs (to match the 8 inputs on the BLU6) it doesn't respond correctly or at all. Similarly the volume control responding even when set as an 'up/down pair' which is what the plate has. Yes all cabling is OK - the equipment is OK and the control ports are set to 3 wire control.

 

Any advice or pointers would be appreciated. Other than 'Buy a BLU100....' ;-)

 

Edit: The BSS forums appear to be down at present, hence my posting here...

Link to comment
Share on other sites

Haven't got my computer on at the mo but shouldn't you be using 2 wire mode? The Blu6 just has resistors to ground in it and the 9088 has a 4k7 pullup on each port so each control function needs only a common and the signal.

 

Dave

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.