mac.calder Posted December 19, 2014 Share Posted December 19, 2014 Quick question - anyone here know how the 6 pin Wieland used for chain motors in Australia is wired? I need to get some hoists electrically tagged, and my normal testing company is unable to do it - which means I am having some regular old sparkies come in to test them and I really don't want them pulling a case off to try and figure out the where and what for. Link to comment Share on other sites More sharing options...
Roderick Posted December 19, 2014 Share Posted December 19, 2014 Response from the Australian Riggers Facebook page:Usually Pins 1,2,3 are your 3 phases. Pin 4 is the 24v from the motor. 5 is Up, 6 is Down. Connector body is earth. More info:Tiny Good Pin 4 is the Control voltage supplied from the chain hoist it is not always 24V, would depend on the hoist. Link to comment Share on other sites More sharing options...
mac.calder Posted December 19, 2014 Author Share Posted December 19, 2014 Cheers Roderick Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.