MarkBarl Posted July 30, 2015 Share Posted July 30, 2015 I'm looking to put some casters on some bass bins. I am thinking about using Tee-nuts example I was wondering how sturdy this would be as the speakers will inevitably be manhandled by the wheels when tipped. What do others use? Link to comment Share on other sites More sharing options...
Dave m Posted July 30, 2015 Share Posted July 30, 2015 I'd be happy using T nuts but also add a second nut inside with something like a bit of heat shrink over the theads to lock it up Link to comment Share on other sites More sharing options...
Simon Lewis Posted July 30, 2015 Share Posted July 30, 2015 Firstly, get some good castors... two Guitel 37023 and two Guitel 37024 (using Adam Hall part numbers) is a popular choice. The whole point of using T nuts is that after fitting you can take out the bolt without accessing the inside of the case or enclosure (which by now might be foam lined or made inaccessible). Just put a split washer (and a washer if needed) with the hex bolt when fitting the castor. Also, make the bolt length equal to the combined thickness of castor plate, washers, wood and T nut. I aim to make the bolt end flush with the T nut.In terms of sturdiness, I have happily manhandled cases and speakers fitted with castors on T nuts and hex bolts for years without a problem! Link to comment Share on other sites More sharing options...
WiLL Posted July 31, 2015 Share Posted July 31, 2015 t-nuts would absolutely be the way to go, particularly when used with a spring washer. Link to comment Share on other sites More sharing options...
MarkBarl Posted July 31, 2015 Author Share Posted July 31, 2015 Thanks for the replies. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.